MIXDES 2016 Schedule

Day 1: June 23rd, 2016 (Thursday)

Time Room A
09:30 Welcome Coffee at DMCS (*)
10:00 DMCS Anniversary Celebration and Conference Opening (*)
13:00 Lunch
14:00 Plenary Session I

Terahertz Compact SPICE
M. Shur (Rensselaer Polytech. Inst., USA)

Big Data and Electro-Thermal Design
A.W. Skorek (Univ. Québec at Trois-Rivières, Canada)

15:00 Vendor Presentation: National Instruments

Software-defined Instrumentation – the New Paradigm in Measurements
M. Antonik (National Instruments, Poland)

15:20 Session 1 (Part 1): Design of Integrated Circuits and Microsystems

28 nm UTBB-FDSOI Energy Efficient and Variation Tolerant Custom Digital-Cell Library with Application to a Subthreshold MAC Block
A.A. Vatanjou (Norwegian Univ. of Science and Techn., Norway)

7.3kfps Readout Solution for 65k Pixel X-Ray Camera Working in Zero Dead-Time Mode
A. Kozioł, P. Maj (AGH Univ. of Science and Techn., Poland)

A 10-phases Programmable Clock Generator for the Application in Control of SAR ADC Realized in the CMOS 130 nm Technology
R. Długosz (Univ. Techn. & Life Sciences, Poland), T. Talaśka (UTP Univ. of Science and Techn., Poland)

A 800MS/s 150µV Input-referred Offset Single-Stage Latched Comparator
S. Kazeminia (Urmia Univ. of Techn., Iran), S. Mahdavi (Urmia Graduate Inst., Iran)

16:40 Coffee Break
16:55 Session 7: Signal Processing

Evaluation of Head Pose Estimation Methods for a Non-cooperative Biometric System
M. Włodarczyk, P. Krotewicz, D. Kacperski, K. Grabowski (Lodz Univ. of Techn., Poland)

Low-voltage Quasi-linear Current-to-Voltage Converter for Analog Signal Processing
R. Wojtyna (Univ. Techn. & Life Sciences, Poland)

Multimodal Speech Data Acquisition with the Use of EMA Fast-speed Video Cameras and a Dedicated Microphone Array
Ł. Mik, R. Wielgat (State Higher Vocational School in Tarnow, Poland), A. Lorenc (Maria Curie-Skłodowska Univ. in Lublin, Poland), D. Król (State Higher Vocational School in Tarnow, Poland), R. Święciński (Amsterdam Univ. of Applied Sciences, The Netherlands), R. Jędryka (State Higher Vocational School in Tarnow, Poland)

Pose-Oriented Face Images Acquisition Platform
D. Kacperski, P. Krotewicz, M. Włodarczyk, K. Grabowski (Lodz Univ. of Techn., Poland)

System for 3D Face and Hand Scans Acquisition Dedicated for Multimodal Biometric Identification
W. Sankowski (Lodz Univ. of Techn., Poland)

19:00 Welcome Party
Time Room B
09:30 Welcome Coffee at DMCS (*)
10:00 DMCS Anniversary Celebration and Conference Opening (*)
13:00 Lunch
15:20 Session 3 (Part 1): Analysis and Modelling of ICs and Microsystems

Active Guard Ring Characterization for Smart Power ICs
P. Buccella, C. Stefanucci, J.-M. Sallese, M. Kayal (EPFL, Switzerland)

Analysis and 2D Analytical Modeling of III-V Schottky Barrier Double-Gate MOSFETs
M. Schwarz (none, Germany), A. Kloes (Tech. Hochschule Mittelhessen, Germany)

Computing the Impact of White and Flicker Noise in Continuous-time Integrator-based ADCs
P. Gosselin, A. Koukab (EPFL, Switzerland), M. Kayal (EPFL, Afghanistan)

Contribution to Scaling of the Vertical Slit Field-Effect Transistor (VeSFET)
A. Pfitzner, B. Kowalska (Warsaw Univ. of Techn., Poland)

16:40 Coffee Break
16:55 Session 3 (Part 2): Analysis and Modelling of ICs and Microsystems

High Frequency Limitations of Active Rectifier Circuits for RFID Applications
J. Fischer, J. Borg, J. Johansson (Luleå Univ. of Techn., Sweden)

On Analysis of Harmonic Distortion in Op Amps Based Circuits via Volterra Series
A. Borys (Gdynia Maritime Univ., Poland)

Parameter Identification for Behavioral Modeling of Analog Components Including Degradation
M. Taddiken, T. Hillebrand, K. Tscherkaschin, S. Paul, D. Peters-Drolshagen (Univ. Bremen, Germany)

19:00 Welcome Party
Time Room C
09:30 Welcome Coffee at DMCS (*)
10:00 DMCS Anniversary Celebration and Conference Opening (*)
13:00 Lunch
15:20 Session 9 & 4: Medical Applications & Analysis and Modelling of ICs and Microsystems

Inkjet 3D Printed Microfluidic Devices
K. Adamski, W. Kubicki, R. Walczak (Wrocław Univ. of Techn., Poland)

Monitoring Changes of Pulse Wave Velocity PWV in Medical Telemonitoring System Based on a Synchronized, Dispersed Sensor Network SWBAN
B. Szuster, Z. Szczurek, P. Kowalski, A. Gacek, B. Kubik, A. Michnik, R. Wiśniowski (Inst. of Medical Techn. and Equipment, Poland)

Monitoring of Dynamic Movements Using Acceleration Measurements
K. Neneman, A. Łuczyk, W. Pleskacz (Warsaw Univ. of Techn., Poland)

Lateral Schottky Barrier Diodes Based on GaN/AlGaN 2DEG for Sub-THz Detection
G. Cywiński, I. Yahiuk, K. Szkudlarek, P. Kruszewski, S. Yatsunenko, G. Muzioł, C. Skierbiszewski (IHPP Polish Academy of Sciences, Poland), W. Knap (IHPP Polish Academy of Sciences, Poland and Lab. Charles Coulomb, France)

16:40 Coffee Break
16:55 Special Session IV: Nanoscale Thermal Modelling and Measurement

Thermal transport phenomena beyond the diffusive regime
P.-O. Chapuis, T.T. Nghiem, C. Abs Da Cruz (CNRS-INSA Lyon, France), E. Nefzaoui (ESIEE, France)

19:00 Welcome Party

Day 2: June 24th, 2016 (Friday)

Time Room A
08:15 Plenary Session II

Nanoscale MOSFET Modeling for the Design of Low-power Analog and RF Circuits
C. Enz (EPFL, Switzerland)

08:50 Vendor Presentation: Cadence & Comsol

Enhancing Microelectronics Development by Multiphysics Simulations
T. Englisch, C. Gordalla (Comsol Multiphysics GmbH, Germany)

The Four Aims of EDA Software
A. Klotz (Cadence Design Systems, Germany)

09:30 Session 1 (Part 2): Design of Integrated Circuits and Microsystems

A Flexible Low-noise Charge-sensitive Amplifier for Particle Tracking Application
K. Kasiński, R. Kleczek (AGH Univ. of Science and Techn., Poland)

A Low Sampling Frequency Switched Capacitor Low-pass Filter for Wireless Receivers
J. Kopanski, Ł. Wiechowski, K. Siwiec, W. Pleskacz (Warsaw Univ. of Techn., Poland)

A nA Crystal-Less Oscillator for Internet of Things
M. Coustans, F. Krummenacher, M. Kayal (EPFL, Switzerland), C. Terrier (EM Microelectronic-Marin SA, Switzerland)

A New Class-AB Flipped Voltage Follower Using a Common-gate Auxiliary Amplifier
P. Monsurrò (Sapienza Univ. Rome, Italy), A. Trifiletti, F. Centurelli, D. Ruscio (Univ. Rome Sapienza, Italy)

10:50 Coffee Break
11:10 Session 1 (Part 3): Design of Integrated Circuits and Microsystems

A New Current Mode Min-Max Circuit Using CMOS Technology for Fuzzy Applications
R. Khayatzadeh, M. Ghasemzadeh (Urmia Univ., Iran), S. Mahdavi (Urmia, Iran)

gm-C Biquad for Weak Inversion Low-amplitude Sensor Applications
R. Arya (Univ. Nova Lisboa, Portugal), J. Oliveira (Univ. Nova Lisboa and FCT NOVA, Portugal)

About Some Peculiar Approaches to Seeking the Ashenhurst Decomposition of Logic Functions in the Reed-Muller Spectrum Domain
D. Polok (Silesian Univ. of Techn., Poland)

Bulk Controlled Offset Cancellation Mechanism for Single-Stage Latched Comparator
S. Kazeminia (Urmia Univ. of Techn., Iran), S. Mahdavi, R. Gholamnejad Kahriz (Urmia Graduate Inst., Iran)

Configurable FPGA Architecture for Hardware-Software Merge Sorting
P.C. Petrut (Univ. Politehnica Timisoara, Romania), A. Amaricai (Politeh. Univ. Timisoara, Romania), O. Boncalo (Univ. Politehnica Timisoara, Romania)

13:00 Lunch
14:00 Tourist Acivities
Time Room B
09:30 Session 5 & 6: Testing and Reliability & Power Electronics

Degradation and Temperature Analysis of Voltage-Controlled Ring Oscillators for Robust and Reliable Oscillator Designs in a 65nm Bulk CMOS Process
K. Tscherkaschin, T. Hillebrand, M. Taddiken, S. Paul, D. Peters-Drolshagen (Univ. Bremen, Germany)

Stochastic LUT-based Reliability-aware Design Method for Operation Point Dependent CMOS Circuits
T. Hillebrand, N. Hellwege, M. Taddiken, K. Tscherkaschin, S. Paul, D. Peters-Drolshagen (Univ. Bremen, Germany)

Extraction of Temperature Dependent Parameters for an Electrothermal Model of Thermoelectric Energy Harvester
P. Dziurdzia, P. Bratek, I. Brzozowski, W. Gelmuda, J. Ostrowski, A. Kos (AGH Univ. of Science and Techn., Poland)

High-temperature Properties of Schottky Diodes Made of Silicon Carbide
K. Górecki, D. Bisewski, J. Zarębski (Gdynia Maritime Univ., Poland), R. Kisiel (Warsaw Univ. of Techn., Poland), M. Myśliwiec (Warsaw Univ. of Techn., Afghanistan)

10:50 Coffee Break
11:10 Session 2: Thermal Issues in Microelectronics

Coupled Thermo-fluidic Simulation for Design Space Exploration of Microchannels in Liquid-cooled 3D ICs
P. Zając, C. Maj, M. Galicia, A. Napieralski (Lodz Univ. of Techn., Poland)

Environment Aware Temperature Control in Processors
P. Kocanda, A. Samake, A. Kos (AGH Univ. of Science and Techn., Poland)

Modelling of Average Radiation and Convection Heat Transfer Coefficient Value in Electronic Systems
A. Samson, T. Torzewicz, T. Raszkowski, M. Janicki, M. Zubert, A. Napieralski (Lodz Univ. of Techn., Poland)

Modelling Simple Photovoltaic Systems with Thermal Phenomena Taken into Account
K. Górecki, E. Krac, P. Górecki (Gdynia Maritime Univ., Poland)

Modelling the Half-bridge Dc-Dc Converter with Self-heating Taken into Account
M. Godlewska, K. Górecki (Gdynia Maritime Univ., Poland)

13:00 Lunch
14:00 Tourist Acivities
Time Room C
09:30 IEEE & PAN Meeting: Meeting of Electron Devices IEEE & Section of Microelectronics PAN
10:50 Coffee Break
11:10 Special Session I: Compact Modeling for RF Circuit Design

Analog and RF Modeling of FDSOI UTBB MOSFET Using Leti-UTSOI Model
S. El Ghouli (STMicroelectronics, France), J.-M. Sallese (EPFL, Swaziland), C. Lallement (Univ. Strasbourg, France), P. Scheer, A. Juge, M. Minondo (STMicroelectronics, France), T. Poiroux (CEA, France)

Current Conveyor Macromodels for Wideband RF Circuit Design
M. Brinson (London Metropolitan Univ., UK), V. Kuznetsov (Bauman Moscow Techn. Univ., Russia)

FOSS as an Efficient Tool for Extraction of MOSFET Compact Model Parameters
D. Tomaszewski (Institute of Electron Techn., Poland), G. Głuszko (Instytut Technologii Elektronowej, Poland), M. Brinson (London Metropolitan University, UK), V. Kuznetsov (Bauman Moscow State Technical University, Russia), W. Grabinski (GMC Research, Switzerland)

Modeling Approach for Rapid NEGF-based Simulation of Ballistic Current in Ultra-short DG MOSFETs
F. Hosenfeld, M. Graef, F. Horst, A. Kloes (Tech. Hochschule Mittelhessen, Germany), B. Iniguez, F. Lime (Univ. Rovira i Virgili, Spain)

Verilog-A Compact Model of Integrated Tapered Spiral Inductors
M.H. Fino (Univ. Nova Lisboa, Portugal)

13:00 Lunch
14:00 Tourist Acivities

Day 3: June 25th, 2016 (Saturday)

Time Room A
08:15 Plenary Session I

Advanced Amplification Techniques for Nanoscale CMOS Technologies
J. Oliveira (Univ. Nova de Lisboa, Portugal)

08:50 Session 1 (Part 4): Design of Integrated Circuits and Microsystems

Design of a Circuit for a CMRR Correction of Multichannel Integrated Circuits
P. Kmon, A. Lisicka (AGH Univ. of Science and Techn., Poland)

Design of a Gain-stage for Pipelined SAR ADC Using Capacitive Charge Pump
K. Chen, A. Alvandpour (Linköping Univ., Sweden)

Development of Multi-Pixel NMOS-based THz Detectors and Readout System Targeted for Spectroscopy Applications
J. Marczewski, D. Obrębski, C. Kołaciński, M. Zbieć, K. Kucharski (Institute of Electron Techn., Poland), P. Zagrajek (Military Univ. of Techn., Poland), P. Kopyt (Warsaw Univ. of Techn., Poland)

Encryption Using Reconfigurable Reversible Logic Gate and Its Simulation in FPGAs
M. Pawłowski, M. Bryk, K. Gracki (Warsaw Univ. of Techn., Poland), P. Kerntopf (Univ. Lodz, Poland), A. Skorupski (Warsaw Univ. of Techn., Poland)

Fast Integrated Circuit of Pixel Architecture for Digital X-ray Imaging
P. Gryboś, P. Kmon, P. Maj, R. Szczygiel (AGH Univ. of Science and Techn., Poland)

10:30 Coffee Break
10:50 Session 1 (Part 5): Design of Integrated Circuits and Microsystems

Implementation of the PRESENT-80 Block Cipher and Analysis of Its Vulnerability to Side Channel Attacks Exploiting Static Power
D. Bellizia, G. Scotti, A. Trifiletti (Sapienza Univ. Rome, Italy)

MOS Transistor as a Current-controlled Device
W. Kuźmicz (Warsaw Univ. of Techn., Poland)

On-chip Analog Current Equalizer as a Countermeasure Against Side-channel Attacks in CMOS Nanometer Technology
D. Bellizia, G. Scotti, A. Trifiletti (Sapienza Univ. Rome, Italy)

Reversible Circuit Synthesis Using Binary Decision Diagrams
K. Podlaski (Lodz Univ. of Techn., Poland)

Synthesis of Anti-aliasing Filters for IF Receivers
P. Monsurrò (Sapienza Univ. Rome, Italy), A. Trifiletti (Univ. Rome Sapienza, Italy)

13:00 Lunch
14:00 Introduction to Poster Session

A Ka-band Phase Shifter Based on a New Four-state MEMS Switch
S. Akbari, M. amirpour, E. Abaspour Sani, M.N. Azarmanesh (Urmia Univ., Iran), S. Akbari (Sharif Univ., Iran)

A New Adaptive PLL to Reduce the Lock Time in 0.18µm Technology
M. Ghasemzadeh (Urmia Univ., Iran), S. Mahdavi (urmia, Iran)

A New Ultra High Speed 5-2 Compressor with a New Structure
M. Ghasemzadeh (Urmia Univ., Iran), S. Mahdavi (Urmia, Iran)

An Artificial Neural Network for Classification a Quality of a Coal Fuel in Combustion Chambers Using FPAA
R. Suszyński, J. Marciniak, K. Wawryn (Koszalin Univ. of Techn., Poland)

Architecture and Design of a Bluetooth Low Energy Controller
P. Wiecha, P. Kłoczko, M. Ciepłucha, W. Pleskacz (Warsaw Univ. of Techn., Poland)

Bandwidth Broadening of the Photodetector Signal Path
L. Opalski, K. Opalska (Warsaw Univ. of Techn., Poland)

Digitally-assisted Offset Cancellation Technigue for Open Loop Residue Amplifiers in High-resolution and High-speed ADCs
S. Kazeminia (Urmia Univ. of Techn., Iran), K. Hadidi (Urmia Univ., Iran)

Modular ASIC-based System for Large-scale Electrical Stimulation and Recording of Brain Activity in Behaving Animals
M. Szypulska, M. Dwużnik, P. Wiącek, A. Skoczeń, T. Fiutowski (AGH Univ. of Science and Techn., Poland), E. Kublik (Nencki Inst. of Experimental Biology, Poland), M. Jędraczka, J. Dusik, I. Ahmed, W. Dąbrowski, P. Hottowy (AGH Univ. of Science and Techn., Poland)

Programmable Frequency Divider Based on Modified Accumulator Architecture
S. Akbari, M. Amirpour, M. Shahdad, E. Abaspour Sani, M.N. Azarmanesh (Urmia Univ., Iran)

The Integrated Transmitter and Receiver Modules for Pulse Oximeter System
C. Kołaciński, A. Szymanski, A. Jarosz, E. Kurjata-Pfitzner, J. Wasowski (Institute of Electron Techn., Poland), T. Borejko, K. Siwiec, W.A. Pleskacz (Warsaw Univ. of Techn., Poland)

Verilog HDL Model Based Thermometer-to-Binary Encoder with Bubble Error Correction
Z. Jaworski (Warsaw Univ. of Techn., Poland)

Quiet Passive Cooling of High Performance Microsystems with Additional Temperature Sensor
A. Samake, P. Kocanda, A. Kos (AGH Univ. of Science and Techn., Poland)

A Novel Closed-form Synthesis Approach for Band-pass Filters with Arbitral End-coupled Reactances. Aspect of the Couplings Among Terminations and End-inverters with Pass-Over of the End-inverters J0,1/Jn,n+1
M. Zaradny (Wrocław Univ. of Techn., Poland)

Laser Curing of Inkjet Printed Strain Gauge Structures
O. Kravchuk, Y. Bobitski (Lviv Polytechnic National Univ., Ukraine), M. Reichenberger (Tech. Hochschule Nürnberg, Germany)

Improvement of the Search Method for Parametric Fault Diagnosis of Analog Integrated Circuits
S. Halgas, M. Tadeusiewicz (Lodz Univ. of Techn., Poland)

Class-BD Audio Amplifiers with Common-mode Free Output
J. Jasielski, S.W. Kuta (Higher Vocational School Tarnow, Poland), W. Machowski (AGH Univ. of Science and Techn., Poland)

Hardware-accelerated Reconstruction of Compressed Neural Signals Based on Inpainting
S. Schmale, H. Kesuma, H. Lange, J. Rust, B. Knoop, D. Peters-Drolshagen, S. Paul (Univ. Bremen, Germany)

Method for Nonlinear Fitting and Impedance Analysis with LCR Meter
R. Malarić, P. Mostarac (Univ. Zagreb, Croatia), G. Petrović (Univ. Split, Croatia), J. Havelka (Univ. Zagreb, Croatia)

Road Structure Analysis Based on Cross-section Images Processing
P. Śniatała, R. Kapela, M. Augustyn, A. Turkot, A. Pożarycki, M. Wyczałek, P. Skrzypczak (Poznan Univ. of Techn., Poland)

A Dedicated Software Environment for Quantitative Evaluation of Various QRS Detectors
N. Henzel, J. Wróbel, K. Horoba (Inst. of Medical Techn. and Equipment, Poland)

Artifacts Analysis for the Development of Efficient Stimulation Methodology in Integrated Circuits
Ł. Kadłubowski, P. Kmon (AGH Univ. of Science and Techn., Poland)

New Filtering Approach for Improving Quality of the ECG Signal Recorded During a Non-invasive Electrical Heart Stimulation
J. Gałecka, D. Roj, J. Wróbel, F. Prochaczek, A. Gacek (Inst. of Medical Techn. and Equipment, Poland)

Design and Interfacing Aspects of the Medical Instrumentation for Modern Hospital System for Pregnancy and Labour Monitoring
K. Horoba, J. Jeżewski, J. Wrobel, T. Kupka (Inst. of Medical Techn. and Equipment, Poland), A. Pawlak, R. Czabanski, M. Jeżewski (Silesian Univ. of Techn., Poland)

Detection of Aorta Anatomical Structures Characterized by Various Levels of Pixel Intensity
E. Sobotnicka, J. Wróbel, A. Sobotnicki (Inst. of Medical Techn. and Equipment, Poland)

15:30 Coffee Break during Poster Session
19:00 Closing Ceremony & Conference Banquet
Time Room B
08:50 Session 8 (Part 1): Embedded Systems

A Fault-tolerant Real-time Microcontroller with Multiprocessor Architecture
E. Strollo (Sapienza Univ. Rome, Italy)

A Method for Real-time Data Acquisition Using Matlab Software
K. Sieczkowski, T. Sondej (Military Univ. of Techn., Poland)

A Shared Memory Parameterized and Configurable in FPGA for Use in Multiprocessor Systems
E. Strollo (Sapienza Univ. Rome, Italy)

Communication Between Agents in Alvis Language
P. Matyasik, M. Szpyrka, M. Wypych, J. Biernacki (AGH Univ. of Science and Techn., Poland)

Modeling UML Object Event Handling with Petri Nets
W. Szmuc, T. Szmuc (AGH Univ. of Science and Techn., Poland)

10:30 Coffee Break
10:50 Session 8 (Part 2): Embedded Systems

Polyhedral Source-to-Source Compiler
D. Adamski, G. Jabłoński, P. Perek, A. Napieralski (Lodz Univ. of Techn., Poland)

Priority Management in Alvis Language
M. Szpyrka, A. Biernacka, J. Biernacki, M. Wypych (AGH Univ. of Science and Techn., Poland)

Task Scheduler for Dual-core Real-time Systems
L. Kohutka, V. Stopjakova (Slovak Univ. of Techn in Bratislava, Slovakia)

Thermionic Emission Controller with PID Algorithm
B. Kania, J. Sikora (Lublin Univ. of Techn., Poland)

SoC-FPGA Embedded System for Real-time Thermal Image Processing
G. Bieszczad (Military Univ. of Techn., Poland)

13:00 Lunch
15:30 Coffee Break during Poster Session
19:00 Closing Ceremony & Conference Banquet
Time Room C
08:50 Special Session II: Data Acquisition and Control Systems at Industry and High Energy Physics

Closed-loop Laser Stabilization System
P. Plewiński, D. Makowski, A. Mielczarek, A. Napieralski (Lodz Univ. of Techn., Poland)

Efficient Uncalibrated Rectification Method for Stereo Vision Systems
P. Perek, D. Makowski, A. Napieralski (Lodz Univ. of Techn., Poland)

SDI Image Acquisition Module for 3D Applications
A. Mielczarek, D. Makowski, A. Szubert, A. Napieralski (Lodz Univ. of Techn., Poland)

10:30 Coffee Break
10:50 Special Session III: MEMS Development for Educational Purposes

Modelling Microbolometer Using Matlab/SIMULINK Package with Thermal Noise Sources
J. Nazdrowicz (Lodz Univ. of Techn., Poland)

13:00 Lunch
15:30 Coffee Break during Poster Session
19:00 Closing Ceremony & Conference Banquet

Receipt of papers:

March 15th, 2024

Notification of acceptance:

April 30th, 2024

Registration opening:

May 1st, 2024

Final paper versions:

May 15th, 2024